The Stain Finish

Wood species absorb stain differently. We recommend to test the color on a hidden section of the wood you are using. Wood stains are designed to add color to the substrate of wood and other materials while leaving the substrate mostly visible..Stains are differentiated from varnishes in that the latter has no added colour or pigment and is designed to form a surface film. Some products are marketed as a combination of stain and varnish

Preparation for Stain Finish

In certain cases you need to clean the wood or remove existing stains prior to staining the wood with a commercial stain in order to avoid damaging the wood.This can be the case for both unfinished and finished wood.Applying stains can be very easy or very difficult depending on the type of substrate, type of stain, and the¬†conditions. Fresh, “green” lumber accepts stain poorly, while aged wood absorbs stains relatively well.End grain and bias-cut grain are far more absorbent, thus will accept more pigment and will darken considerably in those areas. .

stain500250

Getting a Perfect Stain Finish

The traditional wood finishing system consists of applying a wood stain and clear protective finish in individual steps. This method permits independent control over each step ,the depth of color and the level of protection and is used to obtain rich, professional-looking finishes on small and large projects.There are special consideration when applying the stained finish process on wood .For expert application tips and specific advice for staining you can always rely on us .You may please contact us for any stain application and assistance.

stain5002503